不銹鋼清洗劑的主要成分是精細研磨料、陰離子表面活性劑、乙醇、溶劑、香精等。是專門為不銹鋼鍋具長期使用，經氧化產品的各種油污、黃銹、白膜、暗淡、黑斑等污漬清除和護理而研制的環保型不銹鋼護理劑。用于進口高檔鍋具保養。同時也適用于電梯、欄桿、不銹鋼臺面等不銹鋼頑固污漬的清洗和保養。

 

　　The main ingredients of stainless steel pot cleaners are fine abrasives, anionic surfactants, ethanol, solvents, flavors, etc. It is a kind of environmental protection stainless steel nursing agent specially developed for the long-term use of stainless steel pots and pans, the cleaning and care of various oil stains, yellow rust, white film, dullness, black spots and other stains of oxidized products. For the maintenance of imported high-grade pots and pans. At the same time, it is also suitable for cleaning and maintenance of stainless steel stubborn stains such as elevators, railings, stainless steel countertops, etc.
 

 

　　不銹鋼清洗劑工藝操作

 

　　Stainless steel cleaner process operation

 

　　手工刷洗：利用刷子直接對不銹鋼件表面進行刷洗，洗凈后再用清水沖洗或漂洗干凈即可

 

　　Hand brushing: directly brush the surface of stainless steel parts with a brush, and then rinse or rinse it with water

 

　　加溫浸泡：將已兌水的不銹鋼清洗劑溶液，加溫到50℃－60℃，浸泡5-10分鐘左右，洗凈后再用清水沖洗或漂洗干凈即可。

 

　　Warm soak: heat the mixed stainless steel detergent solution to 50 ℃ - 60 ℃, soak it for 5-10 minutes, and then rinse or rinse it with water.

 

　　噴淋清洗：用噴淋清洗機進行噴洗，如泡沫多可增加消泡劑使用。

 

　　Spray cleaning: spray cleaning machine for spraying, such as foam can increase the use of defoamer.

 

　　機械清洗：小工件宜采用機械振動攪拌清洗。

 

　　Mechanical cleaning: small workpieces should be cleaned by mechanical vibration agitation.

 

　　超聲波清洗：建議使用至少有兩槽以上的超聲波清洗機，可一槽清洗、一槽漂洗，操作方便提高效率。

 

　　Ultrasonic cleaning: it is recommended to use an ultrasonic cleaning machine with at least two grooves. It can be cleaned in one groove and rinsed in one groove, which is convenient for operation and improves efficiency.